Re: El's Angels First Guild Meeting Is In Session!
Posted: Fri Nov 16, 2007 3:49 pm
I have a pattern that I find very easy - pillowcases for dummies!!!
Pillowcases with no exposed seams!!
3/4 yard for body
2" strip for accent
11" strip for cuff
For travel size pillowcase: 15x26 for body; 2x26 for the accent; and 8x26 for the cuff.
Do not prewash fabric
Fold the 2" strip in half, wrong sides together, and press.
Now, this section will sound crazy; just follow the instructions very literally until you reach the ***s. If you don't say "oh, I get it!" when you get there, you probably did it wrong:
1. Lay the 11" (8" travel) cuff strip right side up on your work table.
2. Put the 2" accent strip on top of it, raw edges together on the top side.
3. Put a few pins to hold in place.
4. Lay the main body fabric on top, right side down, matching raw edges. Add more pins.
5. Reach underneath the body fabric to get the bottom raw edge of the cuff fabric. Scrunch the body fabric together so that you can bring that raw edge around and pin it to all the other raw edges. You should have the wrong side of the cuff fabric on the outside, with the accent and body fabric stuffed inside them.
6. ***Okay, did you get it?
Sew that seam through all five layers.
Pull the body fabric out of the cuff, turning the cuff "tube" right side out. Press cuff and accent flat.
Trim selvedge edges of body and cuff.
With wrong sides together, sew a SCANT 1/4 seam on the bottom and end of the pillowcase. Press seam. Trim any loose threads.
Turn pillowcase wrong side out. Sew a GENEROUS 1/4 seam on bottom and end, so that the first seam is enclosed. Turn right side out.
Wash before using!
Pillowcases with no exposed seams!!
3/4 yard for body
2" strip for accent
11" strip for cuff
For travel size pillowcase: 15x26 for body; 2x26 for the accent; and 8x26 for the cuff.
Do not prewash fabric
Fold the 2" strip in half, wrong sides together, and press.
Now, this section will sound crazy; just follow the instructions very literally until you reach the ***s. If you don't say "oh, I get it!" when you get there, you probably did it wrong:
1. Lay the 11" (8" travel) cuff strip right side up on your work table.
2. Put the 2" accent strip on top of it, raw edges together on the top side.
3. Put a few pins to hold in place.
4. Lay the main body fabric on top, right side down, matching raw edges. Add more pins.
5. Reach underneath the body fabric to get the bottom raw edge of the cuff fabric. Scrunch the body fabric together so that you can bring that raw edge around and pin it to all the other raw edges. You should have the wrong side of the cuff fabric on the outside, with the accent and body fabric stuffed inside them.
6. ***Okay, did you get it?
Sew that seam through all five layers.
Pull the body fabric out of the cuff, turning the cuff "tube" right side out. Press cuff and accent flat.
Trim selvedge edges of body and cuff.
With wrong sides together, sew a SCANT 1/4 seam on the bottom and end of the pillowcase. Press seam. Trim any loose threads.
Turn pillowcase wrong side out. Sew a GENEROUS 1/4 seam on bottom and end, so that the first seam is enclosed. Turn right side out.
Wash before using!