Re: El's Angels First Guild Meeting Is In Session!
Posted: Fri Nov 16, 2007 3:38 pm
Here are the directions for the pillowcases:
Sleepy Time Pillowcase
Fabric Requirements
3/4 yard Main Fabric
1/4 yard Border Band
2" Accent Strip
Cutting
Main Fabric: Pillowcase body: 27" x 41" (Trim Selvage ends only)
Border Band: 9" x 41"
Accent Band: 2" x 41"
Construction
Sew the seams with your serger if you have one, otherwise use a French Seam. To make a French Seam, place fabrics wrong sides together and sew a 1/8” seam. Turn and press on seam with right sides together, then sew a 3/8” seam. This will encase the raw edge and give a nice finish to the inside of the case.
Press accent strip in half lengthwise, wrong sides together. Pin the folded strip to the right side of body along one 41” side, raw edges matching and sew through all layers 1/4” from edge. If your main fabric is directional, please consider which end is “up!”
Sew the side seam with serger or French Seam. Sew the bottom with serger or French Seam.
Sew the short sides of the ban right sides together with a 1/4” seam, forming a circle.
Pin the right side of the band to the wrong side of the case and sew with a 1/4” seam.
Turn under raw edge 1/2” and press. Turn to right side of case and align folded edge over top of previous stitching. Top stitch in place.
From QIAD-Linda.
Sleepy Time Pillowcase
Fabric Requirements
3/4 yard Main Fabric
1/4 yard Border Band
2" Accent Strip
Cutting
Main Fabric: Pillowcase body: 27" x 41" (Trim Selvage ends only)
Border Band: 9" x 41"
Accent Band: 2" x 41"
Construction
Sew the seams with your serger if you have one, otherwise use a French Seam. To make a French Seam, place fabrics wrong sides together and sew a 1/8” seam. Turn and press on seam with right sides together, then sew a 3/8” seam. This will encase the raw edge and give a nice finish to the inside of the case.
Press accent strip in half lengthwise, wrong sides together. Pin the folded strip to the right side of body along one 41” side, raw edges matching and sew through all layers 1/4” from edge. If your main fabric is directional, please consider which end is “up!”
Sew the side seam with serger or French Seam. Sew the bottom with serger or French Seam.
Sew the short sides of the ban right sides together with a 1/4” seam, forming a circle.
Pin the right side of the band to the wrong side of the case and sew with a 1/4” seam.
Turn under raw edge 1/2” and press. Turn to right side of case and align folded edge over top of previous stitching. Top stitch in place.
From QIAD-Linda.