Need help in finding a table runner block pattern

Patterns, Fabric, Suggestions, and more. What to do with everything you've got. Everything's Quilting and Fabric related!
Post Reply
ddanielson
Posts: 80
Joined: Mon Sep 20, 2010 4:15 pm

Need help in finding a table runner block pattern

Post by ddanielson »

My mom needs a table runner that is 12" x 58" can be smaller but no bigger. I have searched everywhere for a pattern and I can't seem to find the for 12". I am new at quilting and need a easy pattern do any of you ladies have a idea of a block I could use for a table runner?
Donna
User avatar
Marilynsgrammy
Posts: 33342
Joined: Fri Sep 28, 2007 2:46 pm

Re: Need help in finding a table runner block pattern

Post by Marilynsgrammy »

hi Donna...

if you go to quilterscache.com there are a number of blocks to choose from.. you can make them and sew them into a row.. either with or without sashing between the blocks till you get the size you need...

if you pick maybe a 10 inch block you can add borders along the sides till you get the 12 inches you are looking for..

let us know what you come up with.

Chriss
Romans 8:28
Joannequilts
Posts: 7335
Joined: Mon May 12, 2008 5:38 am

Re: Need help in finding a table runner block pattern

Post by Joannequilts »

Chriss had a good suggestion...that's what I'd recommend, too. Most runners are wider than 12".

Joanne
Ittybittygma
Posts: 6856
Joined: Thu Feb 07, 2008 6:45 am

Re: Need help in finding a table runner block pattern

Post by Ittybittygma »

Hi Donna, Do a search on the ten minute tablerunner. It also comes up as the fifteen minute tablerunner but very easy to make. And you can adjust the width as much as you want.

The original calls for a 10" wide strip by width of fabric (wof)for the main pattern. Then cut a contrasting or coordinating strip about 17-18" wof for the border and end points. This is where you could adjust the exact width you want by how big you want the border to be or just cut the center a little more narrow than the 10".

We did this in our craft group last week and comes out really cute and fast too. For a 58" runner you would have to piece the fabric because most fabric is only 42-44" wide. I did the 10" and the 18" and mine finished out at 13 1/2" wide so you could do a smaller center strip like 9" or a smaller border like 16 1/2" to make it come out pretty close to the 12 inches wide.

It does take a little longer than 10-15 min only because of the measuring, cutting, and pressing to get the borders even and press out the points on the end. The sewing part probably only takes 10 min when you figure out what you are doing. The first one is the hardest, then they get easier. Make a practice one in a small size for yourself to see how it all comes together. Then, have fun.

Hugs. Shirley Mae
ddanielson
Posts: 80
Joined: Mon Sep 20, 2010 4:15 pm

Re: Need help in finding a table runner block pattern

Post by ddanielson »

well ladies this is what I came up with it is so big I had to take 2 pictures of it. It is pinned on my table, I am thinking of just putting it on the machine to quilt it instead of doing it by hand what do you think? if I did it by hand I would b stitching in the ditch, if I do it by machine I would probably make diagonal line with invisible thread
Donna


Image



Image
User avatar
Marilynsgrammy
Posts: 33342
Joined: Fri Sep 28, 2007 2:46 pm

Re: Need help in finding a table runner block pattern

Post by Marilynsgrammy »

Donna... it turned out beautifully... and it sure didn't take you long to put it all together... I love green...

your mom will be thrilled.
Romans 8:28
ddanielson
Posts: 80
Joined: Mon Sep 20, 2010 4:15 pm

Re: Need help in finding a table runner block pattern

Post by ddanielson »

I finished it and posted pics on the photo forum, thanks for everyone help on this
Donna
quilt_florida
Posts: 975
Joined: Sat Jan 13, 2007 4:28 pm

Re: Need help in finding a table runner block pattern

Post by quilt_florida »

That's very lovely. It's the Ohio Star, right? My favorite. Your colors are pretty. Great job.
My guild just had a demo day; one of the ladies showed us a quick (really easy) table runner. If you're interested, I could mail you a copy.
I'd scan & email, but DH doesn't have the scanner hooked up. Pm me if you're interested. It's easy & cute.
TheKid
Posts: 1708
Joined: Sun Jan 07, 2007 4:11 pm

Re: Need help in finding a table runner block pattern

Post by TheKid »

Take any square that you like, and keep repeating it until you get the length that you like. It is easy to do.
Post Reply

Return to “Quilting & Fabric Discussions”