Welcome to the new Quilt in a Day community pages. Please use your old username and password to log in. If you forgot your password, you can reset it from the log in page. If you have questions about how the new board works, try the FAQ link above.

thread tail to long

Tips, Suggestions, and General Discussions about quilting by machine.
Post Reply
ollie1shoe
Posts: 3485
Joined: Mon Apr 02, 2007 1:18 pm

thread tail to long

Post by ollie1shoe » Mon Sep 03, 2012 4:02 pm

any ideas on how to adjust the tail length after the thread auto cuts it it is a babylock espiree i have had this problem ever since i had it serviced last fall the tails are about 3/4 of a inch long or possibly longer if it wasnt so dog gone far to take it back to dealer i would have already done it but i end up having to trim the tails when i am quilting because it looks so bad didnt know if there is any adjustment i could do are just bite the bullet and travel the 100 mile trip and go back to dealer thanks for any help anyone can give me
Top
northbound
Posts: 534
Joined: Sat Feb 24, 2007 1:07 pm

Re: thread tail to long

Post by northbound » Wed Oct 03, 2012 8:56 am

Have you tried contacting Babylock about the cutter? There's a page on the site that you might try:

http://www.babylock.com/contact-us/'>ht ... ontact-us/



Top
Post Reply

Return to “Machine & Longarm Quilting”