Welcome to the new Quilt in a Day community pages. Please use your old username and password to log in. If you forgot your password, you can reset it from the log in page. If you have questions about how the new board works, try the FAQ link above.

CURVED PIECING

Stuck on a block, confused about directions, or have an incredible tip? Try this forum if you're looking for help or guides to improve your quilting techniques.
Post Reply
INKA
Posts: 523
Joined: Fri May 11, 2007 10:41 pm

CURVED PIECING

Post by INKA » Fri May 11, 2007 10:48 pm


Holon
Posts: 594
Joined: Thu Jan 04, 2007 3:44 pm

Re: CURVED PIECING

Post by Holon » Sat May 12, 2007 1:54 am

Welcome to the comunity! I'm not good at explaing things in writing. I think is is much better to watch how to do something. Go to www.quiltersnewsnetwork.com they have shows on there for free, but sometimes it's hard to watch. Try taking a class at your local quilt shop! thats very helpfull!

User avatar
zfatcat
Posts: 18940
Joined: Sat Jan 06, 2007 6:58 pm

Re: CURVED PIECING

Post by zfatcat » Sat May 12, 2007 3:17 am

I used to make my own clothes before quiltig. There are a lot
of curves in clothing. Just make sure you pin. I start in the center and move out to the sides from there. If you centers match you can just ease the fabric to the ends.
Lori 8-)

INKA
Posts: 523
Joined: Fri May 11, 2007 10:41 pm

Re: CURVED PIECING

Post by INKA » Sat May 12, 2007 5:09 am


Quiltcreator
Posts: 1246
Joined: Fri Jan 12, 2007 4:53 pm

Re: CURVED PIECING

Post by Quiltcreator » Sat May 12, 2007 7:27 am

One person's method that I've tried and works well: Cut your templates from freezer paper and iron to your fabric, then cut them out. Don't forget to add seam allowances if they're not already there. Mark the seam lines on both pieces, also mark the centers of both pieces. Remove the freezer paper. Using long slim pins, pin the pieces together, matching the centers and moving out. Catch just a tiny thread with the pins, and match the seam lines as you go. Do not clip into the seam allowance at any point; you should be able to ease everything in without clipping. Sew slowly & carefully & it should work!

cindyg
Posts: 21740
Joined: Mon Feb 05, 2007 10:04 am

Re: CURVED PIECING

Post by cindyg » Sat May 12, 2007 10:01 am

There is the Curve Master foot, too. I've never used one but watched others. It's pretty neat and, of course, they made it look very easy.

Tiggersmom
Posts: 4104
Joined: Fri Jan 05, 2007 4:44 pm

Re: CURVED PIECING

Post by Tiggersmom » Sat May 12, 2007 2:12 pm

there is a thread on the curver master foot on here somewhere....more cons than pluses listed i think.

At quilt camp last year we had a teacher and book she wrote called 'curved pieces so simple'...by Dale Fleming. Her methods are good.

Hope this helps.

Quiltcreator
Posts: 1246
Joined: Fri Jan 12, 2007 4:53 pm

Re: CURVED PIECING

Post by Quiltcreator » Sat May 12, 2007 2:46 pm

The Curvemaster thread is in the notions section - I bumped it to the top so INKA can see it.

Holon
Posts: 594
Joined: Thu Jan 04, 2007 3:44 pm

Re: CURVED PIECING

Post by Holon » Sat May 12, 2007 4:31 pm

INKA I havent done much clothes making but doing curves is allot like doing the sholder of a sleave on a blouse. I wouldnt invest in the curvemaster foot I havent heard anything good about it. Just stick to what you know girl!

INKA
Posts: 523
Joined: Fri May 11, 2007 10:41 pm

Re: CURVED PIECING

Post by INKA » Mon May 14, 2007 8:39 pm

Thanks to everyone for sharing their expertise ... I am not going to give up trying!

Post Reply

Return to “Quilting Technique Discussions”