Welcome to the new Quilt in a Day community pages. Please use your old username and password to log in.
If you forgot your password, you can reset it from the log in page. If you have questions about how the new board
works, try the FAQ link above.
Stuck on a block, confused about directions, or have an incredible tip? Try this forum if you're looking for help or guides to improve your quilting techniques.
- Posts: 1
- Joined: Sun Mar 12, 2017 3:22 am
The pattern that i am using says in the directions to cut fabric in to 1 1/2 x 42 inch strips.4 strips to each panel. I did that and used a 1/4 inch seam as instructed. According to my calculations each panel should measure 5 inches in width. I am coming up at 4 inches. Any thoughts? I recently started using a seam guide. Could this be it?
- Posts: 4014
- Joined: Sun Feb 10, 2008 5:21 am
I don't think it's the seam guide. I don't know where you got the pattern from, but they can make mistakes in the instructions. If it's from a magazine, you can go online and see if they have corrections on their website. Same usually holds true for many of the people who design and sell their patterns.
- Posts: 16715
- Joined: Sat Jan 06, 2007 6:58 pm
Could possibly be an error in the pattern. What pattern are you using? Lori
- Posts: 6048
- Joined: Fri Jul 18, 2008 10:46 am
Okay, let's break this down because I get 4 inches as the finished size (4 1/2 unfinished).
Instructions say to cut your strips at 1 1/2 inches x 42 inches (width of fabric) to make each panel.
Then you will sew the first 2 strips together with right sides of fabric facing (touching) each other using 1/4 inch seam. When you make this seam it subtracts 1/2 inch from those 2 strips. If you open them now and measure, you should have 2 1/2 inches x 42 inches. Add the third strip. Measure and you should have 3 1/2 inches x 42 inches. Add the fourth strip. At this point your unfinished panel should measure 4 1/2 inches x 42 inches.
Since we do not know what pattern you are following this is about the best that can be done to help you out at this time. If you give us more information we might be able to help you out some more.
- Posts: 8641
- Joined: Wed Jan 27, 2010 3:56 am
measurements should be:
1 1/2 - 1/4 seam allowance = 1 1/4 + 1 1/4 = 2 1/2"
2 1/2 - 1/4 = 2 1/4 + 1 1/2 - 1/4 = 1 1/4 = 3 1/2 - 1/4 = 3 1/4 + 1 1/4 = 4 1/2
I'm thinking the pattern is wrong?