Quilt in a Day Forums

Had my babylock espire serviced a couple months. Ago ever since when it goes over a thicker seam it stalls and I have to give it a little help for it to cross it it just doesn't feed it thru good is there anything I can do that might help this problem? I don't want to take it back to this person for service because I am unhappy with his work I took 2 machines for his service and I already took other one back cause itwouldnt sew at all it was like the feed dog was dropped any way long story short. I don't plan on using this shop again and it was a authorized babylock dealer new to this area

Here is something to check on your machine.
Go to the Machine Setting Mode(Top left hand button on LCD Screen)
Go to Page 2 of the menu.
Find the Automatic Fabric Sensor System. Make sure this is set to ON. By default the setting if OFF.

If it is on, then the A.F.S.S. needs to be reset. A static shock from your hand can get this out of sinc. It is a very easy fix for any qualified Babylock tech and should be done at no charge.

rick i sent you a message back thanks

i took it for service i saw on the hook it had a big old burr thats why i decided maybe it had jumped time or something that caused it to quit sewing all together