Welcome to the new Quilt in a Day community pages. Please use your old username and password to log in. If you forgot your password, you can reset it from the log in page. If you have questions about how the new board works, try the FAQ link above.
machine quilting, how to prevent bobbin color from showing on top?
-
- Posts: 5
- Joined: Wed Jan 05, 2011 5:44 pm
machine quilting, how to prevent bobbin color from showing on top?
I'm machine quilting, red thread in bobbin, white thread on top, using darning set-up, dropped feed dogs; red thread is being partially pulled to top, appears like red specks instead of all white stitching on top! Any suggestions? Thanks!
-
- Posts: 16007
- Joined: Mon Dec 29, 2008 6:42 pm
Re: machine quilting, how to prevent bobbin color from showing on top?
One of your tensions needs to be changed - first try the top - remember where you started so that you can go back if the top doesn't solve your problem - then try the bobbin tension - one move it a little bit - again making a mark so that you can put it back where you started. It is just a trial and error to fix it
Good luck
Jana
Good luck
Jana
-
- Posts: 1680
- Joined: Wed Sep 19, 2012 6:56 am
Re: machine quilting, how to prevent bobbin color from showing on top?
If you don't want to mess with the tension, you can use invisable thread in the bobbin.
-
- Posts: 683
- Joined: Sat Feb 16, 2008 8:11 pm
Re: machine quilting, how to prevent bobbin color from showing on top?
Your top tension is too tight and is pulling up the bobbin thread.