Cutting the 2.5 inch strips
Posted: Thu Feb 03, 2011 8:27 am
I'm making the Double Irish Chain using the Quilt in a Day second edition book.
I square the fabric cut end before I do anything. Then to begin cutting the different 2.5 inch strips from the 3 fabrics, I fold the fabric with opposite sides matching the selvages. I then fold the fabric again matching the fold with the selvages so that I now have a length of fabric that is 4 layers thick. This is what it looks like is being done in the book, except for the squaring, which is done after the fabric is folded into 4th.
What you end up with are strips of 2.5 inch wide fabric with a selvege at both ends.
Is this correct?
My next question is on page 52 step #2 where it says, "Stack 2.5 inch HALF STRIPS. Line up cut edges across top."
Do I take the strips from above and cut them in half so that each strip is half the width of the original fabric width with one short edge made up of the selvege and the opposite short edge a cut edge?
Or can I leave the strips the full length of the original width of the fabric with both selveges?
I hope I've explained this clearly enough for anyone to follow. If not please let me know and I'll try to clear it up more.
I square the fabric cut end before I do anything. Then to begin cutting the different 2.5 inch strips from the 3 fabrics, I fold the fabric with opposite sides matching the selvages. I then fold the fabric again matching the fold with the selvages so that I now have a length of fabric that is 4 layers thick. This is what it looks like is being done in the book, except for the squaring, which is done after the fabric is folded into 4th.
What you end up with are strips of 2.5 inch wide fabric with a selvege at both ends.
Is this correct?
My next question is on page 52 step #2 where it says, "Stack 2.5 inch HALF STRIPS. Line up cut edges across top."
Do I take the strips from above and cut them in half so that each strip is half the width of the original fabric width with one short edge made up of the selvege and the opposite short edge a cut edge?
Or can I leave the strips the full length of the original width of the fabric with both selveges?
I hope I've explained this clearly enough for anyone to follow. If not please let me know and I'll try to clear it up more.